How to Reset Amazon Smart Plug?
Key Takeaways
Resetting an Amazon Smart Plug is a simple process that allows you to restore it to its factory settings. Whether you are experiencing connectivity issues or simply want to start fresh, a reset can often resolve the problem. In this article, we will guide you through the step-by-step process of resetting an Amazon Smart Plug.
Method 1: Factory Reset and Deregister
The first method involves performing a hard reset and deregistering the Smart Plug from your Amazon account. This method is useful if you want to completely remove the plug from your account and start over. Here are the steps:
- Make sure the Smart Plug is plugged in and connected to your Wi-Fi network.
- Press and hold the reset button on the side of the device for at least 12 seconds.
- Release the button.
- Unplug the Smart Plug from the power outlet.
- Wait for 10 seconds (for third-party smart plugs, unplug and wait for 10 seconds).
- Plug the Smart Plug back in.
- Open the Alexa app on your smartphone.
- Go to Devices > Plugs.
- Select the Smart Plug you want to deregister.
- Tap on More > Delete, and confirm the deletion.
- The Smart Plug should now be removed and factory reset.
- The LED indicator will flash orange during the reset and then blue when it’s complete.
Method 2: Simple Reset
If you only want to reset the Smart Plug without deregistering it from your account, you can follow this simpler method:
- Make sure the Smart Plug is plugged into a working power outlet.
- Press and hold the button on the side of the Smart Plug until the LED light turns red.
- Wait for the LED to start blinking blue, indicating that the plug has been reset.
After the reset, you will need to set up the Smart Plug again using the Alexa app. This method is suitable if you want to keep the Smart Plug connected to your account but need to troubleshoot any issues.
Method 3: Alternative Instructions
While the previous methods are commonly recommended, there may be variations in the reset process. Here is an alternative set of instructions:
- Unplug the Smart Plug from the power source.
- Press and hold the button on the side of the plug for at least 12 seconds.
- Release the button once the LED light on the plug turns off completely.
- Reconfigure the Smart Plug with the Alexa app by following the on-screen instructions.
It’s important to note that the exact steps may vary depending on the model and firmware version of your Amazon Smart Plug. It’s always recommended to refer to the official documentation or support resources provided by Amazon for the most accurate instructions.
Conclusion
Resetting an Amazon Smart Plug can be done in a few simple steps, allowing you to troubleshoot issues or start fresh. Whether you choose to perform a factory reset and deregister the plug or simply reset it without removing it from your account, these methods should help you get your Smart Plug back to its default settings.
Related Websites:
FAQs:
Q: Does resetting the smart plug erase all settings and data?
No, resetting the smart plug does not erase all settings and data. It simply restores the smart plug to its default factory settings. Your previous configurations and connected devices may need to be set up again after a reset.
Q: Can a reset solve connectivity issues?
Yes, a reset can often solve connectivity issues with the Amazon Smart Plug. By resetting the plug, it clears any temporary glitches or conflicts that might be causing connectivity problems. However, it is recommended to try troubleshooting steps first before resorting to a reset.
Q: How often should I reset the smart plug?
There is no specific frequency for resetting the smart plug. It is generally only necessary to reset the plug when you are experiencing issues with connectivity or device malfunctions. It is recommended to troubleshoot the problem first and consider a reset as a last resort.
